TOS - Breakout Zone - convert to Tradovate - Add to indicators request

I have used the TOS Breakout Zone indicator and it was very helpful in my trading. Can someone convert the TOS code below for Tradovate and add it to the list of indicators? Thanks.

A picture of the indicator:

declare Hide_On_Daily;
declare Once_per_bar;

input OrMeanS = 0930.0; #hint OrMeanS: Begin Mean Period. Usually Market Open EST.
input OrMeanE = 0935.0; #hint OrMeanE: End Mean period. Usually End of first bar.
input OrBegin = 0930.0; #hint OrBegin: Beginning for Period of Opening Range Breakout.
input OrEnd = 1000.0; #hint OrEnd: End of Period of Opening Range Breakout.
input CloudOn = no; #hint CloudOn: Clouds Opening Range.
input AlertOn = yes; #hint AlertOn: Alerts on cross of Opening Range.
input ShowTodayOnly = {“No”, default “Yes”};
input nAtr = 4; #hint nATR: Lenght for the ATR Risk and Target Lines.
input AtrTargetMult = 2.0; #hint ATRmult: Multiplier for the ATR calculations.

def h = high;
def l = low;
def c = close;
def bar = barNumber();
def s = ShowTodayOnly;
def ORActive = if secondsTillTime(OrMeanE) > 0 and
secondsFromTime(OrMeanS) >= 0
then 1
else 0;
def today = if s == 0
or getDay() == getLastDay() and
secondsFromTime(OrMeanS) >= 0
then 1
else 0;
def ORHigh = if ORHigh[1] == 0
or ORActive[1] == 0 and
ORActive == 1
then h
else if ORActive and
h > ORHigh[1]
then h
else ORHigh[1];
def ORLow = if ORLow[1] == 0
or ORActive[1] == 0 and
ORActive == 1
then l
else if ORActive and
l < ORLow[1]
then l
else ORLow[1];
def ORWidth = ORHigh - ORLow;
def na = double.nan;
def ORHA = if ORActive
or today < 1
then na
else ORHigh;
def ORLA = if ORActive
or today < 1
then na
else ORLow;
def O = ORHA - Round(((ORHA - ORLA) / 2) / TickSize(), 0) * TickSize();
def ORActive2 = if secondsTillTime(OREnd) > 0 and
secondsFromTime(ORBegin) >= 0
then 1
else 0;
def ORHigh2 = if ORHigh2[1] == 0
or ORActive2[1] == 0 and
ORActive2 == 1
then h
else if ORActive2 and
h > ORHigh2[1]
then h
else ORHigh2[1];
def ORLow2 = if ORLow2[1] == 0
or ORActive2[1] == 0 and
ORActive2 == 1
then l
else if ORActive2 and
l < ORLow2[1]
then l
else ORLow2[1];
def ORWidth2 = ORHigh2 - ORLow2;
def TimeLine = if secondsTillTime(OREnd) == 0
then 1
else 0;
def ORmeanBar = if !ORActive and ORActive[1]
then barNumber()
else ORmeanBar[1];
def ORendBar = if !ORActive2 and ORActive2[1]
then barNumber()
else ORendBar[1];
def ORL = if (o == 0 , na, o);
plot ORLext = if barNumber() >= highestAll(ORmeanBar)
then HighestAll(if isNaN(c[-1])
then ORL[1]
else double.nan)
else double.nan;
ORLext.SetDefaultColor(color.Yellow);
ORLext.SetStyle(curve.Long_DASH);
ORLext.SetLineWeight(3);
ORLext.HideTitle();
def ORH2 = if ORActive2
or today < 1
then na
else ORHigh2;
plot ORH2ext = if barNumber() >= highestAll(ORendBar)
then HighestAll(if isNaN(c[-1])
then ORH2[1]
else double.nan)
else double.nan;
ORH2ext.SetDefaultColor(color.Green);
ORH2ext.SetStyle(curve.Long_DASH);
ORH2ext.SetLineWeight(3);
ORH2ext.HideTitle();
def ORL2 = if ORActive2
or today < 1
then na
else ORLow2;
plot ORL2ext = if barNumber() >= highestAll(ORendBar)
then HighestAll(if isNaN(c[-1])
then ORL2[1]
else double.nan)
else double.nan;
ORL2ext.SetDefaultColor(color.Red);
ORL2ext.SetStyle(curve.Long_DASH);
ORL2ext.SetLineWeight(3);
ORL2ext.HideTitle();
def RelDay = (ORL - ORL2) / (ORH2 - ORL2);
def dColor = if RelDay > .5
then 5
else if RelDay < .5
then 6
else 4;
def pos = (ORH2 - ORL2)/10;
plot d1 = if (TimeLine , ORH2, na);
plot d2 = if (TimeLine , ORH2 - ( pos * 2), na);
plot d3 = if (TimeLine , ORH2 - ( pos * 3), na);
plot d4 = if (TimeLine , ORH2 - ( pos * 4), na);
plot d5 = if (TimeLine , ORH2 - ( pos * 5), na);
plot d6 = if (TimeLine , ORH2 - ( pos * 6), na);
plot d7 = if (TimeLine , ORH2 - ( pos * 7), na);
plot d8 = if (TimeLine , ORH2 - ( pos * 8), na);
plot d9 = if (TimeLine , ORH2 - ( pos * 9), na);
plot d10 = if (TimeLine ,(ORL2), na);
d1.SetPaintingStrategy(PaintingStrategy.POINTS);
d2.SetPaintingStrategy(PaintingStrategy.POINTS);
d3.SetPaintingStrategy(PaintingStrategy.POINTS);
d4.SetPaintingStrategy(PaintingStrategy.POINTS);
d5.SetPaintingStrategy(PaintingStrategy.POINTS);
d6.SetPaintingStrategy(PaintingStrategy.POINTS);
d7.SetPaintingStrategy(PaintingStrategy.POINTS);
d8.SetPaintingStrategy(PaintingStrategy.POINTS);
d9.SetPaintingStrategy(PaintingStrategy.POINTS);
d10.SetPaintingStrategy(PaintingStrategy.POINTS);
d1.AssignValueColor(GetColor(Dcolor));
d2.AssignValueColor(GetColor(Dcolor));
d3.AssignValueColor(GetColor(Dcolor));
d4.AssignValueColor(GetColor(Dcolor));
d5.AssignValueColor(GetColor(Dcolor));
d6.AssignValueColor(GetColor(Dcolor));
d7.AssignValueColor(GetColor(Dcolor));
d8.AssignValueColor(GetColor(Dcolor));
d9.AssignValueColor(GetColor(Dcolor));
d10.AssignValueColor(GetColor(Dcolor));
d1.HideBubble();
d2.HideBubble();
d3.HideBubble();
d4.HideBubble();
d5.HideBubble();
d6.HideBubble();
d7.HideBubble();
d8.HideBubble();
d9.HideBubble();
d10.HideBubble();
d1.HideTitle();
d2.HideTitle();
d3.HideTitle();
d4.HideTitle();
d5.HideTitle();
d6.HideTitle();
d7.HideTitle();
d8.HideTitle();
d9.HideTitle();
d10.HideTitle();
addCloud(if CloudOn == yes
then orl
else double.nan
, orl2,createColor(244,83,66), createColor(244,83,66));
addCloud(if CloudOn == yes
then orl
else double.nan
, orh2,createColor(66,244,131), createColor(66,244,131));

Begin Risk Algorithm

First Breakout or Breakdown bars

def Bubbleloc1 = isNaN(close[-1]);
def BreakoutBar = if ORActive
then double.nan
else if !ORActive and c crosses above ORH2
then bar
else if !isNaN(BreakoutBar[1]) and c crosses ORH2
then BreakoutBar[1]
else BreakoutBar[1];
def ATR = if ORActive2
then Round((Average(TrueRange(h, c, l), nATR)) / TickSize(), 0) * TickSize()
else ATR[1];
def cond1 = if h > ORH2 and
h[1] <= ORH2
then Round((ORH2 + (ATR * AtrTargetMult)) / TickSize(), 0) * TickSize()
else cond1[1];
plot ORLriskUP = if bar >= OREndBar and !ORActive and today
then HighestAll(ORH2ext - 2)
else double.nan;
ORLriskUP.SetStyle(Curve.Long_Dash);
ORLriskUP.SetDefaultColor(Color.Green);
ORLriskUP.HideTitle();
def crossUpBar = if close crosses above ORH2
then bar
else double.nan;
AddChartBubble(bar == HighestAll(crossUpBar), ORLriskUP, “RiskON ORH”, color.green, no);
plot ORLriskDN = if bar >= OREndBar and !ORActive and close < ORL
then HighestAll(ORL2ext + 2)
else double.nan;
ORLriskDN.SetStyle(Curve.Long_Dash);
ORLriskDN.SetDefaultColor(Color.Red);
ORLriskDN.HideTitle();
def crossDnBar = if close crosses below ORL2ext
then bar
else double.nan;
AddChartBubble(bar == HighestAll(crossDnBar), HighestAll(ORLriskDN), “Risk ON ORL”, color.red, yes);

High Targets

plot Htarget = if bar >= BreakoutBar
then cond1
else double.nan;
Htarget.SetPaintingStrategy(paintingStrategy.Squares);
Htarget.SetLineWeight(1);
Htarget.SetDefaultColor(Color.White);
Htarget.HideTitle();
AddChartBubble(BubbleLoc1, Htarget, “RO”, color.white, if c > Htarget then no else yes);
def condHtarget2 = if c crosses above cond1
then Round((cond1 + (ATR * AtrTargetMult)) / TickSize(), 0) * TickSize()
else condHtarget2[1];
plot Htarget2 = if bar >= BreakoutBar
then condHtarget2
else double.nan;
Htarget2.SetPaintingStrategy(PaintingStrategy.Squares);
Htarget2.SetLineWeight(1);
Htarget2.SetDefaultColor(Color.Plum);
Htarget2.HideTitle();
AddChartBubble(BubbleLoc1, Htarget2, “2nd T”, color.plum, if c > Htarget2
then no
else yes);
def condHtarget3 = if c crosses above condHtarget2
then Round((condHtarget2 + (ATR * AtrTargetMult)) / TickSize(), 0) * TickSize()
else condHtarget3[1];
plot Htarget3 = if bar >= BreakoutBar
then condHtarget3
else double.nan;
Htarget3.SetPaintingStrategy(PaintingStrategy.Squares);
Htarget3.SetLineWeight(1);
Htarget3.SetDefaultColor(Color.Plum);
Htarget3.HideTitle();
AddChartBubble(isNaN(C[-1]), Htarget3, “3rd T”, color.plum, if c > Htarget3 then no else yes);
def condHtarget4 = if c crosses above condHtarget3
then Round((condHtarget3 + (ATR * AtrTargetMult)) / TickSize(), 0) * TickSize()
else condHtarget4[1];
plot Htarget4 = if bar >= HighestAll(BreakoutBar)
then condHtarget4
else double.nan;
Htarget4.SetPaintingStrategy(PaintingStrategy.Squares);
Htarget4.SetLineWeight(1);
Htarget4.SetDefaultColor(Color.Plum);
Htarget4.HideTitle();
AddChartBubble(BubbleLoc1, Htarget4, “4th T”, color.plum, if c > Htarget4 then no else yes);
def condHtarget5 = if c crosses above condHtarget4
then Round((condHtarget4 + (ATR * AtrTargetMult)) / TickSize(), 0) * TickSize()
else condHtarget5[1];
plot Htarget5 = if bar >= BreakoutBar
then condHtarget5
else double.nan;
Htarget5.SetPaintingStrategy(PaintingStrategy.Squares);
Htarget5.SetLineWeight(1);
Htarget5.SetDefaultColor(Color.Plum);
Htarget5.HideTitle();
AddChartBubble(BubbleLoc1, Htarget5, “5th T”, color.plum, if c > Htarget5 then no else yes);

Low Targets

def cond2 = if L < ORL2 and
L[1] >= ORL2
then Round((ORL2 - (AtrTargetMult * ATR)) / TickSize(), 0) * TickSize()
else cond2[1];
plot Ltarget = if bar >= HighestAll(OREndBar)
then highestAll(if isNaN(c[-1])
then cond2
else double.nan)
else double.nan;
Ltarget.SetPaintingStrategy(PaintingStrategy.Squares);
Ltarget.SetLineWeight(1);
Ltarget.SetDefaultColor(Color.White);
Ltarget.HideTitle();
AddChartBubble(BubbleLoc1, cond2, “RO”, color.white, if c < Ltarget
then yes
else no);
def condLtarget2 = if c crosses below cond2
then Round((cond2 - (AtrTargetMult * ATR)) / TickSize(), 0) * TickSize()
else condLtarget2[1];
plot Ltarget2 = if bar >= HighestAll(OREndBar)
then highestAll(if isNaN(c[-1])
then condLtarget2
else double.nan)
else double.nan;
Ltarget2.SetPaintingStrategy(PaintingStrategy.Squares);
Ltarget2.SetLineWeight(1);
Ltarget2.SetDefaultColor(Color.Plum);
Ltarget2.HideTitle();
AddChartBubble(BubbleLoc1, condLtarget2, “2nd T”, color.plum, if c < condLtarget2
then yes
else no);
def condLtarget3 = if c crosses below condLtarget2
then Round((condLtarget2 - (AtrTargetMult * ATR)) / TickSize(), 0) * TickSize()
else condLtarget3[1];
plot Ltarget3 = if bar >= HighestAll(OREndBar)
then highestAll(if isNaN(c[-1])
then condLtarget3
else double.nan)
else double.nan;
Ltarget3.SetPaintingStrategy(PaintingStrategy.Squares);
Ltarget3.SetLineWeight(1);
Ltarget3.SetDefaultColor(Color.Plum);
Ltarget3.HideTitle();
AddChartBubble(BubbleLoc1, condLtarget3, “3rd T”, color.plum, if c < Ltarget3
then yes
else no);
def condLtarget4 = if c crosses condLtarget3
then Round((condLtarget3 - (AtrTargetMult * ATR)) / TickSize(), 0) * TickSize()
else condLtarget4[1];
plot Ltarget4 = if bar >= HighestAll(OREndBar)
then highestAll(if isNaN(c[-1])
then condLtarget4
else double.nan)
else double.nan;
Ltarget4.SetPaintingStrategy(PaintingStrategy.Squares);
Ltarget4.SetLineWeight(1);
Ltarget4.SetDefaultColor(Color.Plum);
Ltarget4.HideTitle();
AddChartBubble(BubbleLoc1, condLtarget4, “4th T”, color.plum, if c < Ltarget4
then yes
else no);
def condLtarget5 = if c crosses condLtarget4
then Round((condLtarget4 - (AtrTargetMult * ATR)) / TickSize(), 0) * TickSize()
else condLtarget5[1];
plot Ltarget5 = if bar >= HighestAll(OREndBar)
then highestAll(if isNaN(c[-1])
then condLtarget5
else double.nan)
else double.nan;
Ltarget5.SetPaintingStrategy(PaintingStrategy.Squares);
Ltarget5.SetLineWeight(1);
Ltarget5.SetDefaultColor(Color.Plum);
Ltarget5.HideTitle();
AddChartBubble(BubbleLoc1, condLtarget5, “5th T”, color.plum, if c < Ltarget5
then yes
else no);
def last = if secondsTillTime(1600) == 0 and
secondsFromTime(1600) == 0
then c[1]
else last[1];
plot LastClose = if Today and last != 0
then last
else Double.NaN;
LastClose.SetPaintingStrategy(PaintingStrategy.Dashes);
LastClose.SetDefaultColor(Color.White);
LastClose.HideBubble();
LastClose.HideTitle();
AddChartBubble(SecondsTillTime(0930) == 0, LastClose, “PC”, color.gray, yes);
alert(c crosses above ORH2, “”, Alert.Bar, Sound.Bell);